Spec no: DSAM6354 Rev No: v.1b Date: Aug/29/2012 Page: 1 of 6

Approved: Wynec Checked: Allen LiU Drawn: C.H.H.H. ERP: 1201008401

3.5x2.8 mm surface mounted LED lamp
Attention: Observe precautions to manage electrostatic discharge sensitive devices

Item number: AA3528ZGSK GREEN

Features
Simple color issue for consistent lighting.
Compatible with all SMT mounting (Surface Technology (SMT) and solder processes.
Available on ribbon and roll for automated location.
Ideal for backlighting.
Packed in rollers of 2000st for efficient handling and storage.
Moisture sensitivity level 3 for reliable performance in different environments.
Consistent with ROHS standards, supporting environmentally friendly manufacturing.
DESCRIPTION
AA3528ZGSK Green LED is designed with Ingan on Sapphire, which provides a high quality light source. To prevent damage from static electricity and power surplus, it is recommended to use a wrist or anti-electrostatic glove when handling and ensure that all devices and machines are electrically grounded.

Package dimensions
All dimensions are in millimeters with a tolerance of ± 0.25 mm unless otherwise stated. The unit has a single mounting surface and must be mounted according to the specifications.

Spec no: DSAM6354 Rev No: v.1b Date: Aug/29/2012 Page: 2 of 6

Handling of precautions
Manage components at the side surfaces using tweezers or suitable tools.
Avoid direct contact with the silicone surface to prevent internal circuit damage.
Stap did not mount PCB with exposed LEDs to prevent lens scraps or circuit damage.
The internal diameter of the SMD -pickup nozzle should not exceed the size of the LED.
Use a smooth material for the nozzle tip to avoid damaging the LED surface.
Program component dimensions in the pick-and-mask.
Silicone ancestry is permeable to gases, which makes it susceptible to damage from corrosive substances such as H2S.S.Scarp 'caution should be taken when using LEDs near such substances.

Selection guide
Absolute maximum rating at TA = 25 ° C

Electrical / optical properties at TA = 25 ° C

θ1/2 is the angle from the optical center line where the brilliant intensity is half the top value.
Brilliant intensity and brilliant flow is within a tolerance of +/- 15%.
Brilliant intensity values ​​can be traced according to CIE127-2007 standards.
Part no: AA3528ZGSK

Dice Lens Type: Green (Inan) Water Clear

Viewing angle [1]: Min.300, Type.500, 120 °

Symbol parameter device type.max.Suits test conditions

λak Peak Wavel -Length Green 515 Nm @ IF = 20MA
λd dominant wavelength green 525 nm @ IF = 20MA
Δλ1/2 spectral line half width green 35 nm @ IF = 20MA
C Capacitance green 45 pf @ vf = 0v; F = 1MHz
VF forward voltage green 3.3 - 4.1 V @ IF = 20MA
Ir reverse stream green 50 ua @ our = 5v
Parameter green units:

Power dissipation 123 MW
DC forward current 30 mA
Top ahead power 150 mA
Reverse spit 5 v
Operating temperature -40 ° C to +85 ° C
Storage temperature -40 ° C to +85 ° C
Notes:

Wave length: +/- 1nm.
Forward voltage: +/- 0.1V.
Spec no: DSAM6354 Rev No: v.1b Date: Aug/29/2012 Page: 5 of 6

Soldering
Refreshing is recommended; other solder methods can cause damage to the product. The light profile and the recommended pattern is provided below.

Recommended solder pattern (units: mm; tolerance: ± 0.1)

Roller dimension

Tape dimensions (units: mm)

Spec no: DSAM6354 Rev No: v.1b Date: Aug/29/2012 Page: 6 of 6

Packaging and etiquette specifications
AA3528ZGSK