SPECIFICATION NUMBER: DSAJ8755

REVISION NUMBER: V.3

DATE: APR/20/2011

Page 1 / 7

Kingbright APTF3216SEEZGQBDC Full-Color Surface Mount LED Lamp

ATTENTION: OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES

FEATURES:

3.2mm x 1.6mm Surface-Mount Technology (SMT) LED, with a thickness of 0.75mm.
Low power consumption.
Capable of producing any color in the visible spectrum, including white light.
Packaged in quantities of 2000 pieces per reel.
Moisture sensitivity level: Level 3.
Compliant with RoHS standards.
DESCRIPTION:
The Hyper Red source color devices are made with AlGaInP on GaAs substrate LEDs.
The Green source color devices are made with InGaN on Sapphire LEDs.
The Blue source color devices are made with InGaN LEDs.
Static electricity and power surges can damage the LEDs.
Use a wrist band or anti-electrostatic glove when handling the LEDs.
All devices, equipment, and machinery must be electrically grounded.

PACKAGE DIMENSIONS:
Notes:

All dimensions are in millimeters (inches).
Tolerance is ±0.2(0.008") unless otherwise noted.
The specifications, characteristics, and technical data described in the datasheet are subject to change without prior notice.
The device has a single mounting surface and must be mounted according to the specifications.
SPECIFICATION NUMBER: DSAJ8755

REVISION NUMBER: V.3

DATE: APR/20/2011

Page 2 / 7

SELECTION GUIDE:
Notes:

θ1/2 is the angle from the optical centerline where the luminous intensity is half of the peak value.
Luminous intensity/luminous flux: +/-15%.
ABSOLUTE MAXIMUM RATINGS at TA=25°C:

ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C:

Part No. Dice Lens Type Iv (mcd) @ 20mA [2] Viewing Angle [1] Min. Typ. 2θ1/2
APTF3216SEEZGQBDC Hyper Red (AlGaInP) Water Clear 200 400 Green (InGaN) 200 350 Blue (InGaN) 55 80
120°
Notes:

Wavelength: +/-1nm.
Forward Voltage: +/-0.1V.
1/10 Duty Cycle, 0.1ms Pulse Width.
SPECIFICATION NUMBER: DSAJ8755

REVISION NUMBER: V.3

DATE: APR/20/2011

Page 3 / 7 - 5 / 7

APTF3216SEEZGQBDC Color Specifications:

(Individual pages for Hyper Red, Green, and Blue LEDs with respective technical data)

SPECIFICATION NUMBER: DSAJ8755

REVISION NUMBER: V.3

DATE: APR/20/2011

Page 6 / 7

REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS:
Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product.

Recommended Soldering Pattern (Units: mm; Tolerance: ± 0.1):
(Pattern diagram provided)

Reel Dimension:
(Dimensions provided)

Tape Dimensions:
(Dimensions provided)

SPECIFICATION NUMBER: DSAJ8755

REVISION NUMBER: V.3

DATE: APR/20/2011

Page 7 / 7

PACKING & LABEL SPECIFICATIONS:
(Packaging and label details provided)

PRECAUTIONARY NOTES:

The information included in this document reflects representative usage scenarios and is intended for technical reference only.
The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage, customers should refer to the latest datasheet for updated specifications.
When using the products referenced in this document, please ensure the product is operated within the environmental and electrical limits specified in the datasheet. Kingbright is not responsible for any subsequent issues if customer usage exceeds the specified limits.
The information in this document applies to typical usage in consumer electronics applications. For applications with special reliability requirements or life-threatening liabilities, such as automotive or medical, consult with a Kingbright representative for further assistance.
The contents of this document may not be reproduced or re-transmitted without permission by Kingbright.
All design applications should refer to Kingbright's application notes available at https://www.KingbrightUSA.com/ApplicationNotes.