SPEC NO: DSAM8435 REV NO: V.2A DATE: MAR/28/2015 PAGE: 1 OF 6

APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1301002584

7.62mm (0.3INCH) SINGLE DIGIT NUMERIC DISPLAY

Part Number: SC03-12CGKWA Green

Features:

0.3-inch digit height for clear visibility.
Low current operation for energy efficiency.
Excellent character appearance for high-quality display.
Easy mounting on P.C. boards or sockets for versatile integration.
Mechanically rugged for durability.
Standard gray face with white segment for optimal contrast.
RoHS compliant for environmental sustainability.
Description:

The Green source color devices are crafted with AlGaInP on GaAs substrate Light Emitting Diodes, ensuring high performance and reliability.

Package Dimensions & Internal Circuit Diagram:

Notes:

All dimensions are in millimeters (inches), with a tolerance of ±0.25mm (±0.01") unless specified otherwise.
The specifications, characteristics, and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAM8435 REV NO: V.2A DATE: MAR/28/2015 PAGE: 2 OF 6

Selection Guide:

Note: Luminous intensity/luminous Flux: +/-15%. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.

Absolute Maximum Ratings at TA=25°C

Electrical / Optical Characteristics at TA=25°C

Notes:

Wavelength: +/-1nm.
Forward Voltage: +/-0.1V.
Wavelength value is traceable to the CIE127-2007 compliant national standards.
Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
1/10 Duty Cycle, 0.1ms Pulse Width. 2mm below package base.

Part No. Dice Lens Type Iv (ucd) [1] @ 10mA Description

Min. Typ.
Green (AlGaInP) White Diffused 21000 57000 Common Cathode, Rt. Hand Decimal. *9000 *17000 SC03-12CGKWA
Symbol Parameter Device Typ. Max. Units Test Conditions

λpeak Peak Wavelength Green 574 nm IF=20mA
λD Dominant Wavelength Green 570 nm IF=20mA
Δλ1/2 Spectral Line Half-width Green 20 nm IF=20mA
C Capacitance Green 15 pF VF=0V; f=1MHz
VF Forward Voltage Green 2.1 2.5 V IF=20mA
IR Reverse Current Green 10 uA VR=5V
Parameter Green Units

Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature[2] 260°C For 3-5 Seconds
SPEC NO: DSAM8435 REV NO: V.2A DATE: MAR/28/2015 PAGE: 3 OF 6

Green SC03-12CGKWA

(Continued from previous page)

SPEC NO: DSAM8435 REV NO: V.2A DATE: MAR/28/2015 PAGE: 4 OF 6

PACKING & LABEL SPECIFICATIONS SC03-12CGKWA

Terms and conditions for the usage of this document:

The information included in this document reflects representative usage scenarios and is intended for technical reference only.
The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage, customers should refer to the latest datasheet for the updated specifications.
When using the products referenced in this document, please ensure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
The information in this document applies to typical usage in consumer electronics applications. If the customer's application has special reliability requirements or life-threatening liabilities, such as automotive or medical usage, please consult with a Kingbright representative for further assistance.
The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes