Spec No: DSAP8356 / 1301000319 Rev No: V.1A Date: 03/09/2020

SA36-11GWA 9.14 mm (0.36 inch) Single Digit Numeric Display

Description:

Devices crafted with Gallium Phosphide Green Light Emitting Diode.
Caution: Electrostatic discharge and power surge could damage the LEDs; use wrist bands or anti-electrostatic gloves when handling.
All devices and machinery must be electrically grounded.
Features:

Digit Height: 0.36 inch for clear visibility.
Power Efficiency: Low current operation.
Character Quality: Excellent appearance.
Mounting: Easy on P.C. boards or sockets.
Luminous Intensity: Categorized for different needs.
Durability: Mechanically rugged.
Standard Color: Gray face with white segment.
Compliance: RoHS compliant.
Applications:

Home and smart appliances.
Display time and digital combination.
Industrial and instrumental applications.
Numeric status indicators.
Selection Guide:

Part Number: SA36-11GWA
Emitting Color: Green (GaP)
Lens Type: White Diffused
Iv (ucd) @ 10mA: 1400 Min. to 3500 Typ.
Absolute Maximum Ratings at TA=25°C:

Power Dissipation: 62.5 mW
Reverse Voltage: 5 V
Junction Temperature: 110 °C
Operating Temperature: -40 To +85 °C
Storage Temperature: -40 To +85 °C
DC Forward Current: 25 mA
Peak Forward Current: 140 mA
Electrostatic Discharge Threshold (HBM): 8000 V
Lead Solder Temperature: 260°C for 3-5 Seconds
Electrical / Optical Characteristics at TA=25°C:

Wavelength at Peak Emission (λpeak): 565 nm (Green)
Dominant Wavelength (λdom): 568 nm (Green)
Spectral Bandwidth at 50% (Δλ): 30 nm (Green)
Capacitance (C): 15 pF
Forward Voltage: 2.0 - 2.4 V
Reverse Current (VR = 5V): - 10 µA
Technical Data:

Forward Current vs. Forward Voltage
Luminous Intensity vs. Forward Current
Forward Current Derating Curve
Luminous Intensity vs. Ambient Temperature
Recommended Wave Soldering Profile:

Through-hole displays are incompatible with reflow soldering.
Use mild "no-clean" fluxes for soldering.
Clean components with water only, avoiding harsh organic solvents.
Packing & Label Specifications:

Do not bend component leads by hand without proper tools.
Ensure terminal pitch matches the substrate board's hole pitch during insertion.
Circuit Design Notes:

Use protective current-limiting resistors for operating LEDs within the specified range.
Design the driving circuit to protect against reverse voltages and transient spikes.
Precautionary Notes:

Information provided is for technical reference only.
Part numbers and specifications are subject to change without notice.
Operate products within the limits specified in the datasheet.