Spec No: DSAM8412 / 1301002455 Rev No: V.3A Date: 03/09/2020

SA36-11CGKWA 9.14 mm (0.36 inch) Single Digit Numeric Display

Descriptions:

Devices crafted with AlGaInP on GaAs substrate Light Emitting Diode.
Caution: Electrostatic discharge and power surge could damage the LEDs.
Handling recommendation: Use a wrist band or anti-electrostatic glove.
All devices and machinery must be electrically grounded.
Features:

Digit Height: 0.36 inch for clear display.
Power Efficiency: Low current operation.
Character Quality: Excellent appearance.
Mounting: Easy on P.C. boards or sockets.
Luminous Intensity: Categorized for different needs.
Durability: Mechanically rugged.
Standard Color: Gray face with white segment.
Compliance: RoHS compliant.
Applications:

Home and smart appliances.
Time and digital combination displays.
Industrial and instrumental applications.
Numeric status indicators.
Attention:

Follow precautions for handling electrostatic discharge sensitive devices.
Selection Guide:

Part Number: SA36-11CGKWA
Emitting Color: Green (AlGaInP)
Lens Type: White Diffused
Iv (ucd) @ 10mA: 3600 Min. to 11000 Typ.
Absolute Maximum Ratings at TA=25°C:

Power Dissipation: 75 mW
Reverse Voltage: 5 V
Junction Temperature: 115 °C
Operating Temperature: -40 to +85 °C
Storage Temperature: -40 to +85 °C
DC Forward Current: 30 mA
Peak Forward Current: 150 mA
Electrostatic Discharge Threshold (HBM): 3000 V
Lead Solder Temperature: 260°C for 3-5 Seconds
Electrical / Optical Characteristics at TA=25°C:

Wavelength at Peak Emission (λpeak): 574 nm (Green)
Dominant Wavelength (λdom): 570 nm (Green)
Spectral Bandwidth at 50% (Δλ): 20 nm (Green)
Capacitance (C): 15 pF
Forward Voltage: 2.0 V
Reverse Current (VR = 5V): - 10 µA
Technical Data:

Forward Current vs. Forward Voltage
Luminous Intensity vs. Forward Current
Forward Current Derating Curve
Luminous Intensity vs. Ambient Temperature
Recommended Wave Soldering Profile:

Through-hole displays are incompatible with reflow soldering.
Use mild "no-clean" fluxes for soldering.
Clean components with water only, avoiding harsh organic solvents.
Packing & Label Specifications:

Do not bend component leads by hand without proper tools.
Ensure terminal pitch matches the substrate board's hole pitch during insertion.
Circuit Design Notes:

Use protective current-limiting resistors for operating LEDs within the specified range.
Design the driving circuit to protect against reverse voltages and transient spikes.
Precautionary Notes:

Information provided is for technical reference only.
Part numbers and specifications are subject to change without notice.
Operate products within the limits specified in the datasheet.