Kingbright PSC05-11GWA: Green 16 Segment Single Digit Alphanumeric Display

High-Performance Green LED Display for Diverse Applications

The PSC05-11GWA is a green LED alphanumeric display that offers a combination of high contrast, light output, and mechanical ruggedness. Made with Gallium Phosphide Green Light Emitting Diode, it is designed for durability and visibility.

Features:

Green LEDs made with Gallium Phosphide for consistent brightness and color
0.5 inch character height for excellent visibility
Low current operation for energy efficiency
High contrast and light output for clear display in various lighting conditions
Easy mounting on PC boards or sockets
Mechanically rugged for reliable performance
Standard gray face with white segment for optimal contrast
RoHS compliant for environmental sustainability
Applications:

Home and smart appliances
Display time and digital combinations
Industrial and instrumental applications
Numeric status indicators
Technical Specifications:

Power Dissipation (PD): 62.5 mW
Reverse Voltage (VR): 5 V
Junction Temperature (Tj): 110 °C
Operating Temperature (Top): -40 to +85 °C
Storage Temperature (Tstg): -40 to +85 °C
DC Forward Current (IF): 25 mA
Peak Forward Current (IFM): 140 mA
Electrostatic Discharge Threshold (HBM): 8000 V
Lead Solder Temperature: 260°C for 3-5 Seconds
Optical Characteristics:

Wavelength at Peak Emission (λpeak): 565 nm
Dominant Wavelength (λdom): 568 nm
Spectral Bandwidth at 50% (Δλ): 30 nm
Capacitance (C): 15 pF
Forward Voltage (VF): 2.0 - 2.4 V
Reverse Current (IR): - 10 µA
Handling and Precautions:

Handle with care to avoid electrostatic discharge and power surge damage.
Use wrist bands or anti-electrostatic gloves when handling LEDs.
Ensure all devices, equipment, and machinery are electrically grounded.
Soldering and Cleaning Recommendations:

Through-hole displays are incompatible with reflow soldering.
Use mild "no-clean" fluxes for soldering.
Clean components with water only; avoid harsh organic solvents.
Perform cleaning at room temperature, not exceeding one minute.
Remove excess moisture with forced-air drying after washing.
Mounting and Circuit Design Notes:

Do not bend component leads by hand without proper tools.
Ensure terminal pitch matches substrate board's hole pitch.
Place component at least 5mm from PCB edge to avoid heat damage during soldering.
Use protective current-limiting resistors for LED operation within specified range.
Design driving circuit to protect against reverse voltages and transient spikes.
Precautionary Notes:

This document is for technical reference and is subject to change without notice.
Refer to the latest datasheet before production for updated specifications.
Operate products within specified limits; Kingbright is not responsible for misuse.
For special applications, consult with Kingbright for further assistance.
For More Information:

Visit Kingbright Application Notes