KingBright PSC08-12YWA: yellow 16-segment single number of alphabet numbers

Kingbright PSC08-12YWA is a high-performance yellow 16-section single-digital monitor. Using phosphide yellow light uses gallium arsenidized phospholipid on the transmitting diode technology.The design of the display is designed for the application of clear visibility and energy efficiency, and provides a combination of low -current operation and high comparison output.

feature:

0.8 -inch character is highly easy to read
Low -current operation of energy saving energy
Visual high contrast and light output under various lighting conditions
Ordinary cathode and public anode can be used for design flexibility
Easy to install on P.C. Board or socket for multi -functional installation
In the harsh environment, mechanical durability
Standard gray face and white segment market, clean appearance
RoHS is in line with environmental sustainability
app:

Family and smart devices to display clear state and time display
Show time and digital combination to read
Need high visible industrial and tool applications
Digital status indicators of various devices
Technical specifications:

Peak wavelength (λpeak): 590 nm of IF = 20mA
Main wavelength (λDom): 588 nm of IF = 20mA
Half width (Δλ1/2) of the spectrum line: 35 nm when if = 20mA
Capacitor (C): 20 pf; f = 1MHz when VF = 0V
Positive voltage (VF): 2.1 to 2.5 V in IF = 20MA
Reverse current (IR): 10 µA when VR = 5V
Absolute maximum rated value:

Disopular power (PD): 75 mW
Reverse voltage (VR): 5 V
Operation/storage temperature range: -40 to+85 ° C
Lead welded temperature: 260 ° C 3-5 seconds
Treatment and prevention measures:

Careful treatment to avoid damage to the equipment.
Make sure that appropriate installation is not necessary to apply pressure on the lead.
For the updated specifications and changes, see the latest data table.
Welding and cleaning instructions:

Welded with a mild "non -clean" flux.
If you need to clean, use water to clean the components to avoid organic solvents.
Clean at room temperature and restrict the washing to one minute.
Immediately after cleaning, use mandatory air to remove excess water.
Circuit design comment:

Consider the protective current resistance of LED operation within the specified restriction.
Design a driving circuit to prevent reverse voltage and transient peaks.
Select the safe work current according to the highest ambient temperature.
Disclaimer:

If the specifications, characteristics and technical data are changed, they will not be notified separately.
All sizes are units in millimeter (inch), and the tolerance is ± 0.25 (0.01 inches), unless there is another explanation.
For further technical assistance and application instructions, visit the application instructions for KingBright.