Spec No: DSAF1101 / 1203002079 Rev No: V.13A Date: 06/21/2018

Kingbright © 2018. All Rights Reserved.

Page 1 / 4

Part Number Emitting Color (Material) Lens Type Iv (mcd) @ 20mA [2] Viewing Angle [1] Min. Typ. 2θ1/2

APTB1615ESGC-F01

High Efficiency Red (GaAsP/GaP) Water Clear: 8 15 *3 *7
Super Bright Green (GaP): 5 12 *5 *12
Viewing Angle: 150°
DESCRIPTIONS

The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode.

FEATURES

Compact 1.6 mm x 1.5 mm SMD LED with 0.7 mm thickness.
Low power consumption.
Wide viewing angle.
Ideal for backlight and indicator applications.
Packaged in reels of 2000 pcs.
Moisture sensitivity level: Level 3.
Tinned pads for improved solderability.
RoHS compliant.
APPLICATIONS

Backlighting
Status indicators
Home and smart appliances
Wearable and portable devices
Healthcare applications
PACKAGE DIMENSIONS

SELECTION GUIDE

Notes:

θ1/2 is the angle from the optical centerline where the luminous intensity is half of the peak value.
Luminous intensity/luminous flux: +/-15%.
Luminous intensity value is traceable to CIE127-2007 standards.
RECOMMENDED SOLDERING PATTERN (units: mm; tolerance: ± 0.1)

Notes:

All dimensions are in millimeters (inches).
Tolerance is ±0.2(0.008") unless otherwise noted.
The specifications, characteristics, and technical data are subject to change without prior notice.
The device has a single mounting surface and must be mounted according to the specifications.
Page 2 / 4

ABSOLUTE MAXIMUM RATINGS at TA=25°C

ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C

Notes:

The dominant wavelength (λd) is the setup value of the sorting machine. (Tolerance λd: ±1nm.)
Forward voltage: ±0.1V.
Wavelength value is traceable to CIE127-2007 standards.
Excess driving current or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
Parameter Symbol Emitting Color Value Unit Typ. Max.

Wavelength at Peak Emission (IF = 20mA) λpeak: High Efficiency Red 627 nm, Super Bright Green 565 nm
Dominant Wavelength (IF = 20mA) λdom: High Efficiency Red 617 nm, Super Bright Green 568 nm
Spectral Bandwidth at 50% Φ REL MAX (IF = 20mA) Δλ: High Efficiency Red 45 nm, Super Bright Green 30 nm
Capacitance C: High Efficiency Red 15 pF, Super Bright Green 15 pF
Forward Voltage (IF = 20mA) VF: High Efficiency Red 2.0 - 2.5 V, Super Bright Green 2.2 - 2.5 V
Reverse Current (VR = 5V) IR: High Efficiency Red -, Super Bright Green 10 uA
Parameter Symbol Value Unit

Power Dissipation PD: High Efficiency Red 75 mW, Super Bright Green 62.5 mW
Reverse Voltage VR: 5 V
Junction Temperature TJ: High Efficiency Red 125 °C, Super Bright Green 110 °C
Operating Temperature Top: -40 To +85 °C
Storage Temperature Tstg: -40 To +85 °C
DC Forward Current IF: High Efficiency Red 30 mA, Super Bright Green 25 mA
Peak Forward Current (IFM) [1]: 160 mA
Electrostatic Discharge Threshold (HBM): 8000 V
Page 3 / 4

TECHNICAL DATA

RELATIVE INTENSITY vs. WAVELENGTH for High Efficiency Red and Super Bright Green LEDs at Ta = 25 °C.
SPATIAL DISTRIBUTION of APTB1615ESGC-F01 at Ta = 25 °C.
Forward Current vs. Forward Voltage and Luminous Intensity vs. Forward Current for both colors.
Forward Current Derating Curve and Luminous Intensity vs. Ambient Temperature.
Page 4 / 4

APTB1615ESGC-F01

TAPE SPECIFICATIONS (units: mm)

REEL DIMENSION (units: mm)

PACKING & LABEL SPECIFICATIONS

REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS

Notes:

Avoid causing stress to the LEDs while exposed to high temperature.
The maximum number of reflow soldering passes is 2 times.
Reflow soldering is recommended; other methods may damage the product.
PRECAUTIONARY NOTES

This document is for technical reference and reflects representative usage scenarios.
Part numbers, types, and specifications are subject to change without notice. Refer to the latest datasheet before production.
Ensure products operate within the limits specified in the datasheet. Kingbright is not liable for issues arising from exceeding these limits.
This information applies to typical consumer electronics applications. For special reliability requirements or life-threatening liabilities, consult with Kingbright.
The document's contents may not be reproduced or re-transmitted without Kingbright's permission.
Refer to Kingbright application notes at http://www.KingbrightUSA.com/ApplicationNotes for all design applications.