SPEC NO: DSAE7243 REV NO: V.11B DATE: DEC/07/2016 PAGE: 1 OF 6

APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203002074

1.6X1.25mm BI-COLOR SMD CHIP LED LAMP

Part Number: APTB1612YSGC-F01 Yellow Super Bright Green

Features:

Compact 1.6mmx1.25mm SMD LED with 0.65mm thickness.
Bi-color capability with low power consumption.
Provides a wide viewing angle.
Ideal for backlight and indicator applications.
Packaged in reels of 2000pcs.
Moisture sensitivity level: Level 3.
Compliant with RoHS standards.
Descriptions:

The Yellow source color devices are crafted with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode.
The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode.
Package Dimensions:

All dimensions are in millimeters (inches).
Tolerance is ±0.2(0.008") unless otherwise noted.
Specifications are subject to change without prior notice.
The device has a single mounting surface and must be mounted according to the specifications.
SPEC NO: DSAE7243 REV NO: V.11B DATE: DEC/07/2016 PAGE: 2 OF 6

Selection Guide:

θ1/2 is the angle from the optical centerline where the luminous intensity is half of the peak value.
Luminous intensity/luminous flux: +/-15%.
Luminous intensity value is traceable to CIE127-2007 standards.
Absolute Maximum Ratings at TA=25°C

Electrical / Optical Characteristics at TA=25°C:

Wavelength: +/-1nm.
Forward Voltage: +/-0.1V.
Wavelength value is traceable to CIE127-2007 standards.
Excessive driving current or operating temperature may result in light degradation or premature failure.
Part No. Emitting Color (Material) Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2θ1/2

APTB1612YSGC-F01 Yellow (GaAsP/GaP) Water Clear 3 8 150°
Super Bright Green (GaP) 5 12
Symbol Parameter Emitting Color Typ. Max. Units Test Conditions

λpeak Peak Wavelength Yellow Super Bright Green 590 565 nm IF=20mA
λD Dominant Wavelength Yellow Super Bright Green 588 568 nm IF=20mA
Δλ1/2 Spectral Line Half-width Yellow Super Bright Green 35 30 nm IF=20mA
C Capacitance Yellow Super Bright Green 20 15 pF VF=0V;f=1MHz
VF Forward Voltage Yellow Super Bright Green 2.1 2.2 2.5 2.5 V IF=20mA
IR Reverse Current Yellow Super Bright Green 10 10 uA VR = 5V
Parameter Yellow Super Bright Green Units

Power dissipation 75 62.5 mW
DC Forward Current 30 25 mA
Peak Forward Current 140 140 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAE7243 REV NO: V.11B DATE: DEC/07/2016 PAGE: 3 OF 6

Electrical and Optical Performance Graphs:

Graphs showing the relative intensity and wavelength for Yellow and Super Bright Green LEDs at Ta = 25 °C.
SPEC NO: DSAE7243 REV NO: V.11B DATE: DEC/07/2016 PAGE: 4 OF 6

Super Bright Green LED Characteristics:

SPEC NO: DSAE7243 REV NO: V.11B DATE: DEC/07/2016 PAGE: 5 OF 6

Reflow Soldering Recommendations:

Reflow soldering is recommended with the provided soldering profile. Other methods may damage the product.
Recommended Soldering Pattern (Units: mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units: mm)

SPEC NO: DSAE7243 REV NO: V.11B DATE: DEC/07/2016 PAGE: 6 OF 6

PACKING & LABEL SPECIFICATIONS APTB1612YSGC-F01

Terms and Conditions:

This document is for technical reference and reflects representative usage scenarios.
Part numbers, types, and specifications are subject to change without notice. Refer to the latest datasheet before production.
Ensure products are operated within the limits specified in the datasheet. Kingbright is not liable for issues arising from exceeding these limits.
This information is for typical consumer electronics applications. For applications with special reliability requirements or life-threatening liabilities, consult with Kingbright.
The document's contents may not be reproduced or re-transmitted without Kingbright's permission.
Refer to Kingbright application notes for all design applications at http://www.KingbrightUSA.com/ApplicationNotes