Spec No: DSAO0362 / 1203014712 Rev No: V.8B Date: 03/07/2019

Kingbright © 2019. All Rights Reserved.

Page 1 / 4

PACKAGE DIMENSIONS

SELECTION GUIDE

Notes:

θ1/2 is the angle from the optical centerline where the luminous intensity is half of the peak value.
Luminous intensity/luminous flux: +/-15%.
Luminous intensity value is traceable to CIE127-2007 standards.
APFA2507QBDSEEZGKC 2.5 x 0.7 mm Right Angle SMD Chip LED Lamp

RECOMMENDED SOLDERING PATTERN (units: mm; tolerance: ± 0.1)

DESCRIPTIONS

Blue source color devices are made with InGaN Light Emitting Diode.
Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode.
Green source color devices are made with InGaN on Sapphire Light Emitting Diode.
Electrostatic discharge and power surge could damage the LEDs.
Use a wrist band or anti-electrostatic glove when handling the LEDs.
All devices, equipment, and machinery must be electrically grounded.
FEATURES

2.5 x 1.0 x 0.7 mm right angle SMD LED, with a thickness of 0.7 mm.
Low power consumption.
Wide viewing angle.
Ideal for backlight and indicator applications.
Packaged in reels of 3000 pcs.
Moisture sensitivity level: Level 3.
Tinned pads for improved solderability.
RoHS compliant.
APPLICATIONS

Backlighting
Status indicators
Home and smart appliances
Wearable and portable devices
Healthcare applications
ATTENTION

Observe precautions for handling electrostatic discharge sensitive devices.

Notes:

All dimensions are in millimeters (inches).
Tolerance is ±0.15(0.006") unless otherwise noted.
The specifications, characteristics, and technical data are subject to change without prior notice.
The device has a single mounting surface and must be mounted according to the specifications.
Part Number Emitting Color (Material) Lens Type Iv (mcd) @ 20mA [2] Viewing Angle [1] Min. Typ. 2θ1/2

APFA2507QBDSEEZGKC
Blue (InGaN) Water Clear 40 65 130°
Hyper Red (AlGaInP) 80 110
Green (InGaN) 300 500
Page 2 / 4

ABSOLUTE MAXIMUM RATINGS at TA=25°C

ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C

APFA2507QBDSEEZGKC

Wavelength at Peak Emission (IF = 20mA, typ) λpeak: Blue 460 nm, Hyper Red 630 nm, Green 515 nm
Dominant Wavelength (IF = 20mA, typ) λdom: Blue 465 nm, Hyper Red 621 nm, Green 525 nm
Spectral Bandwidth at 50% Φ REL MAX (IF = 20mA, typ) Δλ: Blue 25 nm, Hyper Red 20 nm, Green 35 nm
Capacitance (typ) C: Blue 100 pF, Hyper Red 25 pF, Green 45 pF
Forward Voltage (IF = 20mA, typ, max) VF: Blue 3.3 V, Hyper Red 2.0 - 2.5 V, Green 3.3 - 4.1 V
Reverse Current (VR = 5V, max) IR: Blue 50 µA, Hyper Red 10 µA, Green 50 µA
Parameter Symbol Value Unit

Power Dissipation PD: Blue 120 mW, Hyper Red 75 mW, Green 102.5 mW
Reverse Voltage VR: 5 V
Junction Temperature T: 115 °C
Operating Temperature Top: -40 to +85 °C
Storage Temperature Tstg: -40 to +85 °C
DC Forward Current IF: Blue 30 mA, Hyper Red 30 mA, Green 25 mA
Peak Forward Current IFM: Blue 150 mA, Hyper Red 195 mA, Green 150 mA
Electrostatic Discharge Threshold (HBM): Blue -, Hyper Red 250 V, Green 3000 V
Thermal Resistance (Junction / Ambient) Rth JA: Blue 440 °C/W, Hyper Red 505 °C/W, Green 590 °C/W
Thermal Resistance (Junction / Solder point) Rth JS: Blue 320 °C/W, Hyper Red 400 °C/W, Green 480 °C/W
Notes:

The dominant wavelength (λd) is the setup value of the sorting machine. (Tolerance λd: ±1nm.)
Forward voltage: ±0.1V.
Wavelength value is traceable to CIE127-2007 standards.
Excess driving current or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
Page 3 / 4

TECHNICAL DATA

Relative Intensity vs. Wavelength for Blue, Hyper Red, and Green LEDs at Ta = 25 °C.
Spatial Distribution of APFA2507QBDSEEZGKC at various angles.
Forward Current vs. Forward Voltage and Luminous Intensity vs. Forward Current for each color.
Forward Current Derating Curve and Luminous Intensity vs. Ambient Temperature.
Page 4 / 4

TAPE SPECIFICATIONS (units: mm)

REEL DIMENSION (units: mm)

PACKING & LABEL SPECIFICATIONS

REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS

Notes:

Avoid causing stress to the LEDs while exposed to high temperature.
Maximum reflow soldering passes is 2 times.
Reflow soldering is recommended; other methods may damage the product.
PRECAUTIONARY NOTES

This document is for technical reference and reflects representative usage scenarios.
Part numbers, types, and specifications are subject to change without notice. Refer to the latest datasheet before production.
Operate products within the limits specified in the datasheet. Kingbright is not liable for issues arising from exceeding these limits.
This information applies to typical consumer electronics applications. For special reliability requirements or life-threatening liabilities, consult with Kingbright.
The document's contents may not be reproduced or re-transmitted without Kingbright's permission.
Refer to Kingbright application notes for all design applications.