Spec No: DSAO6074 / 1203015273 Rev No: V.2A Date: 04/23/2018

Kingbright © 2018. All Rights Reserved.

Page 1 / 4

DESCRIPTIONS

Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode.
Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip.
Green source color devices are made with InGaN on Sapphire Light Emitting Diode.
Electrostatic discharge and power surge could damage the LEDs.
It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs.
All devices, equipment, and machinery must be electrically grounded.
FEATURES

2.5 x 1.0 x 0.7 mm right angle SMD LED, with a thickness of 0.7 mm.
Low power consumption.
Wide viewing angle.
Ideal for backlight and indicator applications.
Packaged in reels of 3000 pcs.
Moisture sensitivity level: Level 3.
Tinned pads for improved solderability.
RoHS compliant.
APPLICATIONS

Backlighting
Status indicators
Home and smart appliances
Wearable and portable devices
Healthcare applications
ATTENTION

Observe precautions for handling electrostatic discharge sensitive devices.

PACKAGE DIMENSIONS

SELECTION GUIDE

Notes:

θ1/2 is the angle from the optical centerline where the luminous intensity is half of the peak value.
Luminous intensity/luminous flux: +/-15%.
Luminous intensity value is traceable to CIE127-2007 standards.
APFA2507LSURKSYKZGKC 2.5 x 0.7 mm Right Angle SMD Chip LED Lamp

RECOMMENDED SOLDERING PATTERN (units: mm; tolerance: ± 0.1)

Notes:

All dimensions are in millimeters (inches).
Tolerance is ±0.15(0.006") unless otherwise noted.
The specifications, characteristics, and technical data are subject to change without prior notice.
The device has a single mounting surface and must be mounted according to the specifications.
Part Number Emitting Color (Material) Lens Type Iv (mcd) @ 2mA [2] Viewing Angle [1] Min. Typ. 2θ1/2

APFA2507LSURKSYKZGKC
Hyper Red (AlGaInP) Water Clear 20 30 130° *6 *10
Super Bright Yellow (AlGaInP) 6 15 20 60 *6 *15 *20 *60
Green (InGaN) Red Yellow
Page 2 / 4

ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C

Parameter Symbol Emitting Color Value Unit Typ. Max.

Wavelength at Peak Emission (IF = 2mA) λpeak: Hyper Red 645 nm, Super Bright Yellow 590 nm, Green 515 nm
Dominant Wavelength (IF = 2mA) λdom: Hyper Red 630 nm, Super Bright Yellow 590 nm, Green 525 nm
Spectral Bandwidth at 50% Φ REL MAX (IF = 2mA) Δλ: Hyper Red 28 nm, Super Bright Yellow 20 nm, Green 35 nm
Capacitance C: Hyper Red 35 pF, Super Bright Yellow 20 pF, Green 45 pF
Forward Voltage (IF = 2mA) VF: Hyper Red 1.75 - 2.2 V, Super Bright Yellow 1.85 - 2.2 V, Green 2.65 - 3.1 V
Reverse Current (VR = 5V) IR: Hyper Red -, Super Bright Yellow 10 uA, Green 50 uA
ABSOLUTE MAXIMUM RATINGS at TA=25°C

Parameter Symbol Value Unit

Power Dissipation PD: Hyper Red 75 mW, Super Bright Yellow 75 mW, Green 102.5 mW
Reverse Voltage VR: 5 V
Junction Temperature T: 115 °C
Operating Temperature Top: -40 to +85 °C
Storage Temperature Tstg: -40 to +85 °C
DC Forward Current IF: Hyper Red 30 mA, Super Bright Yellow 30 mA, Green 25 mA
Peak Forward Current IFM: Hyper Red 185 mA, Super Bright Yellow 175 mA, Green 150 mA
Electrostatic Discharge Threshold (HBM): Hyper Red -, Super Bright Yellow 3000 V, Green 3000 V
Notes:

The dominant wavelength (λd) is the setup value of the sorting machine. (Tolerance λd: ±1nm.)
Forward voltage: ±0.1V.
Wavelength value is traceable to CIE127-2007 standards.
Excess driving current or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
Page 3 / 4

TECHNICAL DATA

Relative Intensity vs. Wavelength for Hyper Red, Super Bright Yellow, and Green LEDs at Ta = 25 °C.
Spatial Distribution of APFA2507LSURKSYKZGKC at various angles.
Forward Current vs. Forward Voltage and Luminous Intensity vs. Forward Current for each color.
Forward Current Derating Curve and Luminous Intensity vs. Ambient Temperature.
Page 4 / 4

PACKING & LABEL SPECIFICATIONS

TAPE SPECIFICATIONS (units: mm)

REEL DIMENSION (units: mm)

REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS

Notes:

Avoid causing stress to the LEDs while exposed to high temperature.
Maximum reflow soldering passes is 2 times.
Reflow soldering is recommended; other methods may damage the product.
PRECAUTIONARY NOTES

This document is for technical reference and reflects representative usage scenarios.
Part numbers, types, and specifications are subject to change without notice. Refer to the latest datasheet before production.
Operate products within the limits specified in the datasheet. Kingbright is not liable for issues arising from exceeding these limits.
This information applies to typical consumer electronics applications. For special reliability requirements or life-threatening liabilities, consult with Kingbright.
The document's contents may not be reproduced or re-transmitted without Kingbright's permission.
Refer to Kingbright application notes for all design applications.