Spec No: DSAO4555 / 1203015163

Rev No: V.3B

Date: 07/05/2017

© 2017 Kingbright. All Rights Reserved.

Page 1 / 4

Part Number Emitting Color (Material) Lens Type Iv (mcd) @ 2mA [2] Viewing Angle [1] Min. Typ. 2θ1/2
APBD3224LZGKSYKC Green (InGaN) Water Clear 50 150°
Super Bright Yellow (AlGaInP) 20 50°
DESCRIPTIONS:

The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode.
The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip.
Electrostatic discharge and power surge could damage the LEDs.
It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs.
All devices, equipment, and machinery must be electrically grounded.
FEATURES:

3.2 x 2.4 mm SMD LED, 2.4mm thickness.
Low power consumption.
Ideal for backlight and indicator.
Package: 1500 pcs / reel.
Moisture sensitivity level: 3.
RoHS compliant.
APPLICATIONS:

Backlight.
Status indicator.
Home and smart appliances.
Wearable and portable devices.
Healthcare applications.
ATTENTION:
Observe precautions for handling electrostatic discharge sensitive devices.

PACKAGE DIMENSIONS:

SELECTION GUIDE:
Notes:

θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
Luminous intensity / luminous flux: +/-15%.
Luminous intensity value is traceable to CIE127-2007 standards.
Page 2 / 4

ABSOLUTE MAXIMUM RATINGS at TA=25°C:

ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C:
APBD3224LZGKSYKC

Notes:

The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
Forward voltage: ±0.1V.
Wavelength value is traceable to CIE127-2007 standards.
Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
Parameter Symbol Emitting Color Value Unit Min. Typ. Max.
Wavelength at Peak Emission λpeak nm 515 590 -
Dominant Wavelength λdom nm 525 590 -
Spectral Bandwidth at 50% Φ REL MAX nm 35 20 -
Capacitance C pF 45 20 -
Forward Voltage VF V 2.3 1.5 2.65
3.1 2.1 2.1
Reverse Current (VR = 5V) IR uA - 10 10
Page 3 / 4

TECHNICAL DATA:

RELATIVE INTENSITY vs. WAVELENGTH:

Ta = 25 °C
SPATIAL DISTRIBUTION:
APBD3224LZGKSYKC

Forward Current vs. Forward Voltage:

Ta = 25 °C
Luminous Intensity vs. Forward Current:

Ta = 25 °C
Forward Current Derating Curve:

Luminous Intensity vs. Ambient Temperature
Page 4 / 4

TECHNICAL DATA TAPE SPECIFICATIONS (units : mm):

REEL DIMENSION (units : mm):

PACKING & LABEL SPECIFICATIONS:

REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS:
Notes:

Don't cause stress to the LEDs while it is exposed to high temperature.
The maximum number of reflow soldering passes is 2 times.
Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product.
PRECAUTIONARY NOTES:

The information included in this document reflects representative usage scenarios and is intended for technical reference only.
The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice.
When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet.
The information in this document applies to typical usage in consumer electronics applications.
The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes