Spec No: DSAH3851 / 1203003655 Rev No: V.11B Date: 01/04/2023 Page 1 / 4

© 2023 Kingbright. All Rights Reserved.

DESCRIPTIONS

Green source color devices made with InGaN on Sapphire Light Emitting Diode.
Electrostatic discharge and power surge could damage the LEDs.
Use a wrist band or anti-electrostatic glove when handling the LEDs.
All devices, equipment, and machinery must be electrically grounded.
FEATURES

1.6 x 1.2 x 0.6 mm right angle SMD LED, 0.6 mm thickness.
Low power consumption.
Wide viewing angle.
Ideal for backlight and indicator.
Package: 2000 pcs / reel.
Moisture sensitivity level: 3.
Tinned pads for improved solderability.
Halogen-free.
RoHS compliant.
APPLICATIONS

Backlight.
Status indicator.
Home and smart appliances.
Wearable and portable devices.
Healthcare applications.
ATTENTION
Observe precautions for handling electrostatic discharge sensitive devices.

PACKAGE DIMENSIONS

All dimensions are in millimeters (inches).
Tolerance is ±0.1(0.004") unless otherwise noted.
SELECTION GUIDE

Part Number: APA1606ZGC
Emitting Color (Material): Green (InGaN)
Lens Type: Water Clear
Iv (mcd) @ 20mA: 200
Viewing Angle [1]: 110° (Min. Typ. 2θ1/2: 400)
Notes:

θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
Luminous intensity / luminous flux: +/-15%.
Luminous intensity value is traceable to CIE127-2007 standards.
The device has a single mounting surface and must be mounted according to the specifications.
For right angle SMD LEDs, the solder stencil should be at least 5mil in thickness.
Spec No: DSAH3851 / 1203003655 Rev No: V.11B Date: 01/04/2023 Page 2 / 4

ABSOLUTE MAXIMUM RATINGS at TA=25°C

Parameter Symbol Value Unit
Power Dissipation PD 102.5 mW
Reverse Voltage VR 5 V
Junction Temperature T 115 °C
Operating Temperature Top -40 to +85 °C
Storage Temperature Tstg -40 to +85 °C
DC Forward Current IF 25 mA
Peak Forward Current IFM 150 mA
Electrostatic Discharge Threshold (HBM) - 450 V
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C

Parameter Symbol Emitting Color Value Unit Typ. Max.
Wavelength at Peak Emission λpeak Green 515 nm -
Dominant Wavelength λdom Green 525 nm -
Spectral Bandwidth at 50% Δλ Green 30 nm -
Capacitance C Green 45 pF -
Forward Voltage VF Green 3.3 V 4.1
Reverse Current IR Green - 50 μA
Notes:

Forward voltage: ±0.1V.
Wavelength value is traceable to CIE127-2007 standards.
Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
Spec No: DSAH3851 / 1203003655 Rev No: V.11B Date: 01/04/2023 Page 3 / 4

TECHNICAL DATA

RELATIVE INTENSITY vs. WAVELENGTH
FORWARD CURRENT vs. FORWARD VOLTAGE
LUMINOUS INTENSITY vs. FORWARD CURRENT
FORWARD CURRENT DERATING CURVE
LUMINOUS INTENSITY vs. AMBIENT TEMPERATURE
REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS

Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product.
Spec No: DSAH3851 / 1203003655 Rev No: V.11B Date: 01/04/2023 Page 4 / 4

PACKING & LABEL SPECIFICATIONS

PRECAUTIONARY NOTES

The information included in this document reflects representative usage scenarios and is intended for technical reference only.
The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice.
When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet.
The information in this document applies to typical usage in consumer electronics applications.
The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.