KINGBRIGHT ACSA08-51SYKWA Super Bright Yellow LED Display

Features:

Constructed with AlGaInP on GaAs substrate light emitting diode chip.
Requires ESD protection; use of wrist band or anti-electrostatic glove recommended when handling.
All equipment must be electrically grounded to prevent damage from electrostatic discharge and power surges.
0.8 inch digit height for clear visibility.
Operates on low current for enhanced energy efficiency.
Excellent character appearance with mechanically rugged construction.
Gray face with white segment for high contrast.
Packaged in quantities of 200 pcs per reel.
Moisture sensitivity level: 2a.
Compliant with RoHS standards for environmental sustainability.
Applications:

Ideal for home and smart appliances, displaying time and digital combinations.
Suited for industrial and instrumental applications requiring numeric status indication.
Technical Specifications:

Emitting Color: Super Bright Yellow (AlGaInP)
Lens Type: White Diffused
Luminous Intensity at 10mA: 31000 Min. to 93000 Typ. ucd
Common Anode, Right Hand Decimal
Absolute Maximum Ratings at TA=25°C:

Wavelength at Peak Emission (λpeak): 590 nm
Dominant Wavelength (λdom): 590 nm
Spectral Bandwidth at 50%: 20 nm
Capacitance (C): 20 pF
Forward Voltage (VF) at 10mA: 1.95 to 2.35 V
Reverse Current (IR) at 5V: - 10 µA
Operating Conditions:

Power Dissipation: 75 mW
Reverse Voltage: 5 V
Junction Temperature: 115 °C
Operating Temperature Range: -40 to +85 °C
Storage Temperature Range: -40 to +85 °C
DC Forward Current: 30 mA
Peak Forward Current: 175 mA
Electrostatic Discharge Threshold (HBM): 3000 V
Design and Usage Notes:

All dimensions are in millimeters, with a tolerance of ±0.25mm.
Specifications are subject to change without prior notice.
The gap between the reflector and PCB should not exceed 0.25mm.
Exceeding driving current or operating temperature above recommended conditions may result in severe light degradation or premature failure.
Reflow Soldering Profile:

Recommended soldering pattern with units in millimeters and a tolerance of ±0.15mm.
Packaging & Label Specifications:

Detailed packaging and label information provided.
Precautionary Notes:

Information is representative and for technical reference only.
Specifications are subject to future change without notice.
Products must be operated within specified limits.
For applications with special reliability requirements or life-threatening liabilities, consult with Kingbright.
Document contents may not be reproduced without permission.
When any special process such as potting is required for LED assembly, consult with Kingbright representative before proceeding.
Regulatory Approvals:

Compliance with various international standards for safety and quality assurance.
© 2019 Kingbright. All Rights Reserved.

Spec No: DSAG8877 / 1351000565
Rev No: V.10A
Date: 05/15/2019