KINGBRIGHT ACSA08-51SEKWA Super Bright Orange LED Display

Features:

Constructed with AlGaInP on GaAs substrate light emitting diode chip
Caution required for electrostatic discharge and power surge protection
Recommended use of wrist band or anti-electrostatic glove when handling
All devices must be electrically grounded for safety
0.8 inch digit height for clear visibility
Operates on low current, enhancing energy efficiency
Excellent character appearance with a mechanically rugged design
Aesthetic gray face and white segment for high contrast
Packaged in quantities of 200 pcs per reel for convenience
Moisture sensitivity level: 2a, ensuring reliability in various environments
Compliant with RoHS standards for environmental sustainability
Applications:

Ideal for home and smart appliances, providing a clear display of time and digital combinations
Suited for industrial and instrumental applications requiring numeric status indication
Attention:

Strict adherence to electrostatic discharge sensitive device handling precautions is mandatory
Technical Specifications:

Emitting Color: Super Bright Orange (AlGaInP)
Lens Type: White Diffused
Forward Current at 10mA: 31000 Min. to 82000 Typ. ucd
Common Anode, Rt. Hand Decimal
Absolute Maximum Ratings at TA=25°C:

Wavelength at Peak Emission (IF = 10mA): 610 - nm
Dominant Wavelength (IF = 10mA): 605 - nm
Spectral Bandwidth at 50%: 29 - nm
Capacitance: 15 - pF
Forward Voltage (IF = 10mA): 2.0 to 2.35 V
Reverse Current (VR = 5V): - 10 uA
Operating Conditions:

Power Dissipation: 75 mW
Reverse Voltage: 5 V
Junction Temperature: 115 °C
Operating Temperature Range: -40 to +85 °C
Storage Temperature Range: -40 to +85 °C
DC Forward Current: 30 mA
Peak Forward Current: 195 mA
Electrostatic Discharge Threshold (HBM): 3000 V
Notes:

Luminous intensity value is traceable to CIE127-2007 standards.
Exceeding driving current or operating temperature above recommended conditions may lead to light degradation or premature failure.
Relative humidity levels between 40% and 60% in the production area are recommended to are recommended to prevent static electricity build-up.
Recommended Soldering Pattern:

Units in millimeters, tolerance: ± 0.15
Forward Current vs. Forward Voltage Characteristics:

Graph illustrating the relationship between forward current and voltage at Ta = 25 °C
Luminous Intensity vs. Forward Current and Ambient Temperature:

Graphs showing how luminous intensity varies with forward current and ambient temperature at Ta = 25 °C
Reflow Soldering Profile for Lead-Free SMD Process:

Notes on proper handling during soldering to prevent product damage
Packing & Label Specifications:

Detailed information on packaging dimensions and labeling
Precautionary Notes:

Information is representative and for technical reference only
Specifications are subject to change without notice
Products must be operated within specified environmental and electrical limits
Special reliability requirements or life-threatening liabilities applications should consult with Kingbright
Document contents may not be reproduced without permission
Circuit Design Notes:

Recommendations for protective current-limiting resistors, driving circuit design, and safe operating current selection
Regulatory Approvals:

Compliance with various international standards for safety and quality assurance
© 2017 Kingbright. All Rights Reserved.

Spec No: DSAG8875 / 1351000564
Rev No: V.10A
Date: 07/04/2017