SPEC NO: DSAI1567 REV NO: V.1 DATE: FEB/27/2008 PAGE: 1 OF 7

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1201002388

5.0mm x 6.0mm Surface Mount LED Lamp
ATTENTION: OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES

Part Number: AAAF5060PBESURVGEC Blue Hyper Red Green

FEATURES
Separate control capability for each color chip.
Compatible with all Surface Mount Technology (SMT) assembly and solder processes.
Available on tape and reel for automated placement.
Packaged in reels of 500pcs for efficient handling and storage.
Moisture sensitivity level 4.
RoHS compliant.
DESCRIPTION
The Blue source color devices are made with InGaN on SiC Light Emitting Diodes.
The Hyper Red source color devices are made with InGaAlP on GaAs substrate Light Emitting Diodes.
The Green source color devices are made with InGaN on SiC Light Emitting Diodes.
Electrostatic discharge and power surges can damage LEDs; use wrist bands or anti-electrostatic gloves when handling.
All devices, equipment, and machinery must be electrically grounded.
PACKAGE DIMENSIONS
All dimensions are in millimeters with a tolerance of ±0.25mm unless otherwise noted. Specifications are subject to change without notice. The device has a single mounting surface and must be mounted according to the specifications.

SPEC NO: DSAI1567 REV NO: V.1 DATE: FEB/27/2008 PAGE: 2 OF 7

SELECTION GUIDE
Absolute Maximum Ratings at TA=25°C

Electrical / Optical Characteristics at TA=25°C

θ1/2 is the angle from the optical centerline where the luminous intensity is half the optical centerline value.
Luminous intensity with asterisk is measured at 50mA; Luminous intensity/luminous flux: +/-15%.
Part No.: AAAF5060PBESURVGEC

Dice Lens Type: Blue (InGaN) WATER CLEAR, Hyper Red (InGaAlP), Green (InGaN)

*Iv (mcd) @ 30mA 50mA: Blue - 110 / 250, Hyper Red - *380 / *500, Green - 280 / 600

Viewing Angle: Min. 100°, Typ. 100°, 2θ1/2 - 100°

Symbol Parameter Device Typ. Max. Units Test Conditions

λpeak Peak Wavelength Blue Hyper Red Green 468 / 640 / 520 nm @ IF=20mA
λD Dominant Wavelength Blue Hyper Red Green 470 / 628 / 525 nm @ IF=20mA
Δλ1/2 Spectral Line Half-width Blue Hyper Red Green 21 / 27 / 35 nm @ IF=20mA
C Capacitance Blue Hyper Red Green 100 / 45 / 100 pF @ VF=0V; f=1MHz
VF Forward Voltage Blue Hyper Red Green 3.2 / 1.9 / 3.2 V @ IF=20mA
IR Reverse Current Blue Hyper Red Green 10 uA @ VR=5V
Parameter Blue Hyper Red Green Units:

Power dissipation 350 mW
DC Forward Current 30 mA / 50 mA / 30 mA
Peak Forward Current 100 mA / 185 mA / 100 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAI1567 REV NO: V.1 DATE: FEB/27/2008 PAGE: 6 OF 7

RECOMMENDED SOLDERING PATTERN
Reflow soldering is recommended; other soldering methods may cause damage to the product. The soldering profile and recommended pattern are provided below.

Tape Specifications (Units: mm)

PACKING & LABEL SPECIFICATIONS
AAAF5060PBESURVGEC

TERMS AND CONDITIONS
The information in this document is for technical reference and is subject to change without notice.
Refer to the latest datasheet for updated specifications before production usage.
Operate the product within the environmental and electrical limits specified in the datasheet.
For applications with special reliability requirements, consult with Kingbright for further assistance.
Do not reproduce or transmit this document without Kingbright's permission.
APPLICATION NOTES
For more information and application assistance, visit Kingbright Application Notes.