© 2020 Kingbright. All Rights Reserved.
Spec No: DSAP8390 / 1301000759
Rev No: V.1A
Date: 03/10/2020

PRODUCT OVERVIEW
The SC08-11SRWA is a Super Bright Red LED numeric display designed for high visibility applications. Its robust construction and low current operation make it suitable for a wide range of uses, from home appliances to industrial instruments.

KEY FEATURES
0.8-inch digit height for clear visibility
Low current operation for energy efficiency
Excellent character appearance for premium look
Easy mounting on P.C. boards or sockets for versatility
Categorized for luminous intensity for tailored brightness
Mechanically rugged for durability
Standard gray face with white segment for contrast
RoHS compliant for environmental sustainability
APPLICATIONS
Home and smart appliances for user interface displays
Display time and digital combination for clocks and timers
Industrial and instrumental applications for status indication
Numeric status displays for various electronic devices
ELECTROSTATIC DISCHARGE (ESD) PRECAUTIONS
Handle LEDs with care to avoid damage from ESD and power surges
Use a wrist band or anti-electrostatic glove when handling
Ensure all devices, equipment, and machinery are electrically grounded
PACKAGE DIMENSIONS
SC08-11SRWA: 20.32 mm (0.8 inch) Single Digit Numeric Display
All dimensions in millimeters (inches), with a tolerance of ±0.25(0.01") unless otherwise noted
ABSOLUTE MAXIMUM RATINGS
At TA=25°C:

Power Dissipation (PD): 75 mW
Reverse Voltage (VR): 5 V
Junction Temperature (Tj): 115 °C
Operating Temperature (Top): -40 to +85 °C
Storage Temperature (Tstg): -40 to +85 °C
DC Forward Current (IF): 30 mA
Peak Forward Current (IFM): 155 mA
Electrostatic Discharge Threshold (HBM): 3000 V
Lead Solder Temperature: 260°C for 3-5 Seconds
ELECTRICAL / OPTICAL CHARACTERISTICS
At TA=25°C:

Wavelength at Peak Emission (IF = 10mA): 655 nm
Dominant Wavelength (IF = 10mA): 640 nm
Spectral Bandwidth at 50% (IF = 10mA): 20 nm
Capacitance: 45 pF
Forward Voltage (IF = 10mA): 1.8 - 2.3 V
Reverse Current (VR = 5V): - 10 µA
TECHNICAL DATA
Forward Current vs. Forward Voltage
Luminous Intensity vs. Forward Current
Forward Current Derating Curve
Luminous Intensity vs. Ambient Temperature
RECOMMENDED WAVE SOLDERING PROFILE
Through-hole displays are incompatible with reflow soldering
Mild "no-clean" fluxes recommended for soldering
If cleaning is required, wash components with water only
Cleaning should take place at room temperature, not exceeding one minute
Remove excess moisture with forced-air drying after water cleaning
MOUNTING METHOD
Do not bend component leads by hand without proper tools
Ensure terminal pitch matches substrate board's hole pitch
Place component at least 5mm from edge of PCB to avoid heat damage
CIRCUIT DESIGN NOTES
Protective current-limiting resistors may be necessary
LEDs in parallel should each have their own resistor
Design circuit to protect against reverse voltages and spikes
Choose safe operating current considering max ambient temperature
Avoid prolonged reverse bias to prevent metal migration
PRECAUTIONARY NOTES
Information is for representative usage and technical reference
Part numbers and specifications are subject to change
Operate products within specified limits in the datasheet
For special applications, consult with Kingbright for assistance
Do not reproduce or transmit information without permission
PACKING & LABEL SPECIFICATIONS
Follow proper lead forming and installation methods
Refer to Kingbright application notes for design applications