Kingbright PSA08-12SRWA: Super Bright Red LED Array for Diverse Applications

The Kingbright PSA08-12SRWA is a high-performance Super Bright Red LED array designed for a variety of applications requiring clear and vibrant illumination. With its robust construction and superior light output, this LED array is an excellent choice for both indoor and outdoor uses.

Key Features:

Super Bright Red Light Emitting Diode (GaAlAs) for high visibility
Electrostatic Discharge (ESD) Protection: Recommended use of wrist bands or anti-static gloves during handling
Low Current Operation for energy efficiency
High Contrast and Light Output for clear visibility in various conditions
Common Cathode and Common Anode Options for flexible circuit design
Easy Mounting on P.C. boards or sockets for quick integration
Mechanically Rugged for durability in harsh environments
Standard Gray Face with White Segment for aesthetic appeal
RoHS Compliant for environmental sustainability
Applications:

Home and Smart Appliances for clear digital display
Display Time and Digital Combination for easy readability
Industrial and Instrumental Applications for reliable performance
Numeric Status Indicators for various devices
Technical Specifications:

Character Height: 0.8 inch
Luminous Intensity: 14000 mcd (Min.) to 27000 mcd (Typ.) at 10mA
Wavelength at Peak Emission (IF = 10mA): 655 nm
Dominant Wavelength (IF = 10mA): 640 nm
Spectral Bandwidth at 50%: 20 nm
Capacitance: 45 pF
Forward Voltage (IF = 10mA): 1.8 to 2.3 V
Reverse Current (VR = 5V): - 10 µA
Absolute Maximum Ratings:

Power Dissipation (PD): 75 mW
Reverse Voltage (VR): 5 V
Junction Temperature: 115 °C
Operating Temperature Range: -40 to +85 °C
Storage Temperature Range: -40 to +85 °C
DC Forward Current (IF): 30 mA
Peak Forward Current (IFM): 155 mA
Electrostatic Discharge Threshold (HBM): 3000 V
Lead Solder Temperature: 260°C for 3-5 seconds
Recommended Wave Soldering Profile:

Pre-heat temperature of 105°C or less
Maximum solder bath temperature of 260°C for 3-5 seconds
Recommended SAC 305 solder alloy
Cleaning Instructions:

Use mild "no-clean" fluxes for soldering
If cleaning is necessary, wash components with water only
Avoid harsh organic solvents that may damage plastic parts
Clean at room temperature and limit washing to one minute
Mounting Method:

Do not bend component leads by hand; use proper tools
Ensure terminal pitch matches substrate board's hole pitch
Place component at least 5mm from PCB edge to avoid heat damage
Circuit Design Notes:

Use protective current-limiting resistors for safe operation
Design driving circuit to protect against reverse voltages and spikes
Choose safe operating current based on maximum ambient temperature
Avoid prolonged reverse bias to prevent metal migration
Precautionary Notes:

This document reflects representative usage scenarios for technical reference
Specifications are subject to change; refer to the latest datasheet before production
Operate products within specified limits; Kingbright is not responsible for misuse
Contact Kingbright for special processes or applications with reliability requirements
Regulatory Approvals:

Adheres to various international standards and regulations