SPECIFICATION NUMBER: DSAH3756 / 1203004180

REVISION NUMBER: V.8B

DATE: 05/11/2020

Page 1 / 4

Kingbright APHCM2012ZGC-F01 LED Lamp

DESCRIPTIONS:

The Green source color devices are made with InGaN on Sapphire Light Emitting Diode.
Electrostatic discharge and power surge could damage the LEDs.
Use a wrist band or anti-electrostatic glove when handling the LEDs.
All devices, equipment, and machinery must be electrically grounded.
FEATURES:

2.0 x 1.25 mm Surface-Mount Device (SMD) LED, with a maximum thickness of 0.5 mm.
Low power consumption.
Wide viewing angle.
Ideal for backlight and indicator applications.
Packaged in quantities of 2000 pieces per reel.
Moisture sensitivity level: 3.
Halogen-free.
Compliant with RoHS standards.
APPLICATIONS:

Backlighting.
Status indicators.
Home and smart appliances.
Wearable and portable devices.
Healthcare applications.
ATTENTION:

Observe precautions for handling electrostatic discharge sensitive devices.

PACKAGE DIMENSIONS

SELECTION GUIDE

APHCM2012ZGC-F01 2.0 x 1.25 mm SMD Chip LED Lamp

RECOMMENDED SOLDERING PATTERN (units: mm; tolerance: ± 0.1)

Part Number Emitting Color (Material) Lens Type

Iv (mcd) @ 20mA [2]

Viewing Angle [1]

Min. Typ. 2θ1/2

APHCM2012ZGC-F01 Green (InGaN) Water Clear 300 600 140°

Notes:

θ1/2 is the angle from the optical centerline where the luminous intensity is half of the peak value.
Luminous intensity/luminous flux: +/-15%.
Luminous intensity value is traceable to CIE127-2007 standards.
SPECIFICATION NUMBER: DSAH3756 / 1203004180

REVISION NUMBER: V.8B

DATE: 05/11/2020

Page 2 / 4

ABSOLUTE MAXIMUM RATINGS at TA=25°C

ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C

APHCM2012ZGC-F01

Parameter Symbol Emitting Color Value Unit Typ. Max.
Wavelength at Peak Emission λpeak Green 515 nm - -
Dominant Wavelength λdom Green 525 nm - -
Spectral Bandwidth at 50% Δλ Green 30 nm - -
Capacitance C Green 45 pF - -
Forward Voltage VF Green 3.3 V - 4.1
Reverse Current (VR = 5V) IR Green - µA 50 -
Notes:

The dominant wavelength (λd) is the setup value of the sorting machine. (Tolerance λd: ±1nm.)
Forward voltage: ±0.1V.
Wavelength value is traceable to CIE127-2007 standards.
Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
SPECIFICATION NUMBER: DSAH3756 / 1203004180

REVISION NUMBER: V.8B

DATE: 05/11/2020

Page 3 / 4

TECHNICAL DATA

RELATIVE INTENSITY vs. WAVELENGTH

GREEN

(Wavelength vs. Relative Intensity Graph)

SPATIAL DISTRIBUTION

(Spatial Distribution Graph)

REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS

Notes:

Avoid causing stress to the LEDs while exposed to high temperature.
Limit the number of reflow soldering passes to a maximum of 2 times.
Reflow soldering is recommended; other methods may damage the product.
SPECIFICATION NUMBER: DSAH3756 / 1203004180

REVISION NUMBER: V.8B

DATE: 05/11/2020

Page 4 / 4

PACKING & LABEL SPECIFICATIONS

APHCM2012ZGC-F01

PRECAUTIONARY NOTES:

This document provides representative usage scenarios for technical reference only.
Part numbers, types, and specifications are subject to change without notice. Refer to the latest datasheet before production.
Ensure products operate within the limits specified in the datasheet. Kingbright is not liable for issues arising from exceeding these limits.
This information is intended for consumer electronics applications. For applications with special reliability requirements or life-threatening liabilities, such as automotive or medical, consult with a Kingbright representative.
The contents of this document may not be reproduced or re-transmitted without Kingbright's permission.
For design applications, refer to Kingbright's application notes at https://www.KingbrightUSA.com/ApplicationNotes.