Spec No: DSAF1182 / 1203001124 Rev No: V.10B Date: 03/12/2018

Page 1 / 4

APED3528CGCK-F01 Green LED Lamp

Descriptions:

The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode.
Electrostatic discharge and power surge could damage the LEDs.
Use a wrist band or anti-electrostatic glove when handling the LEDs.
All devices, equipment, and machinery must be electrically grounded.
Features:

Single color.
Suitable for all SMD assembly and solder process.
Ideal for backlighting.
Available on tape and reel.
Package: 500 pcs / reel.
Moisture sensitivity level 3.
RoHS compliant.
Applications:

Backlight.
Status indicator.
Home and smart appliances.
Wearable and portable devices.
Healthcare applications.
Attention:
Observe precautions for handling electrostatic discharge sensitive devices.

Package Dimensions and Selection Guide:

Notes:

θ1/2 is the angle from the optical centerline where the luminous intensity is half the peak value.
Luminous intensity / luminous flux: +/-15%.
Luminous intensity value is traceable to CIE127-2007 standards.
Part Number Emitting Color (Material) Lens Type Iv (mcd) @ 20mA [2] Viewing Angle [1] Min. Typ. 2θ1/2
APED3528CGCK-F01 Green (AlGaInP) Water Clear 80 200 70° -
Page 2 / 4

Absolute Maximum Ratings at TA=25°C

Electrical / Optical Characteristics at TA=25°C:

Parameter Symbol Green Units Test Conditions
Peak Wavelength λpeak 574 nm - IF=20mA
Dominant Wavelength λdom [1] 570 nm - IF=20mA
Spectral Bandwidth Δλ 20 nm - IF=20mA
Capacitance C 15 pF - VF=0V; f=1MHz
Technical Data:

Power Dissipation: 75 mW
Reverse Voltage: 5 V
Junction Temperature: 115 °C
Operating Temperature: -40 to +85 °C
Storage Temperature: -40 to +85 °C
DC Forward Current: 30 mA
Peak Forward Current: 150 mA
Electrostatic Discharge Threshold: 3000 V
Page 3 / 4

Technical Graphs:

Relative Intensity vs. Wavelength for Green
Forward Current vs. Forward Voltage
Luminous Intensity vs. Forward Current
Forward Current Derating Curve
Luminous Intensity vs. Ambient Temperature
Spatial Distribution:

APED3528CGCK-F01
Page 4 / 4

Packing & Label Specifications:

The APED3528CGCK-F01 is packed and labeled according to Kingbright's quality standards.

Reflow Soldering Profile for Lead-Free SMD Process:

Notes:

Do not cause stress to the LEDs while exposed to high temperature.
The maximum number of reflow soldering passes is 2 times.
Reflow soldering is recommended; other methods may damage the product.
Precautionary Notes:

This document is for technical reference and reflects representative usage scenarios.
Specifications are subject to change without notice. Refer to the latest datasheet before production use.
Operate products within the limits specified in the datasheet.
For applications with special reliability requirements, consult with Kingbright.
Do not reproduce or transmit this document without Kingbright's permission.