SPECIFICATION NUMBER: DSAB1130 REVISION NUMBER: V.5 DATE: MAR/10/2005 PAGE: 1 OF 4

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP: 1203000427

AP3216SYC SUPER BRIGHT YELLOW

Package Dimensions

Description:
The Super Bright Yellow device is made with DH InGaAlP (on GaAs substrate) light emitting diode chip. A 3.2x1.6mm SMD chip LED lamp designed for high brightness and efficiency.

Features:

3.2mm x 1.6mm SMT LED with 1.1mm thickness.
Low power consumption.
Wide viewing angle for broad visibility.
Ideal for backlight and indicator applications.
Various colors and lens types available.
Packaged in quantities of 2000pcs per reel.
RoHS compliant.
Notes:

All dimensions are in millimeters (inches).
Tolerance is ±0.2(0.008") unless otherwise noted.
Specifications are subject to change without notice.
SPECIFICATION NUMBER: DSAB1130 REVISION NUMBER: V.5 DATE: MAR/10/2005 PAGE: 2 OF 4

Selection Guide:
θ1/2 is the angle from the optical centerline where the luminous intensity is half the optical centerline value.

Electrical / Optical Characteristics at TA=25°C:

Absolute Maximum Ratings at TA=25°C:
Note: 1/10 Duty Cycle, 0.1ms Pulse Width.

Part No.: AP3216SYC SUPER BRIGHT YELLOW (InGaAlP)

LENS TYPE: WATER CLEAR

Iv (mcd) @ 20mA: 36

Viewing Angle:

Min. 120°
Typ. 150°
2θ1/2 120°
Symbol Parameter Device Typ. Max. Test Conditions Units:

λpeak (Peak Wavelength): 590 nm @ IF=20mA
λD (Dominant Wavelength): 588 nm @ IF=20mA
Δλ1/2 (Spectral Line Half-width): 28 nm @ IF=20mA
C (Capacitance): 25 pF @ VF=0V; f=1MHz
VF (Forward Voltage): 2.0 to 2.5 V @ IF=20mA
IR (Reverse Current): 10 μA @ VR = 5V
Parameter Super Bright Yellow Units:

Power dissipation: 125 mW
DC Forward Current: 30 mA
Peak Forward Current: 150 mA
Reverse Voltage: 5 V
Operating/Storage Temperature: -40°C To +85°C
SPECIFICATION NUMBER: DSAB1130 REVISION NUMBER: V.5 DATE: MAR/10/2005 PAGE: 3 OF 4

Super Bright Yellow AP3216SYC

SPECIFICATION NUMBER: DSAB1130 REVISION NUMBER: V.5 DATE: MAR/10/2005 PAGE: 4 OF 4

Recommended Soldering Pattern (Units: mm):

Tape Specifications are provided in millimeters.
Remarks:
If there is a sorting requirement (e.g., forward voltage, luminous intensity, or wavelength), the conditions are as follows:

Wavelength: +/-1nm (Test condition is based on the sorting standard).
Luminous intensity: +/-15% (Test condition is based on the sorting standard).
Forward voltage: +/-0.1V (Test condition is based on the sorting standard).