SPECIFICATION NUMBER: DSAH3721 REVISION NUMBER: V.4 DATE: APR/14/2011 PAGE: 1 OF 5

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1202001195

SUBMINIATURE SOLID STATE LAMP

ATTENTION: OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES

Part Number: AM27ZGC03 Green

Features:

Subminiature package for diverse applications.
Gull wing leads for efficient soldering.
Long life with solid-state reliability.
Low profile design for compact installations.
Packaged in quantities of 1000pcs per reel for streamlined manufacturing.
Moisture sensitivity level 3 for stringent environmental control.
RoHS compliant for environmental sustainability.
Description:
The AM27ZGC03 Green source color devices are made with InGaN on Sapphire Light Emitting Diodes, offering a high-intensity green light output. Static electricity and surges can damage the LEDs, so it is recommended to use a wrist band or anti-electrostatic glove when handling them. All devices, equipment, and machinery must be electrically grounded.

Package Dimensions:
All dimensions are in millimeters with a tolerance of ±0.25mm unless otherwise noted. Lead spacing is measured at the point where the leads emerge from the package. Specifications, characteristics, and technical data are subject to change without prior notice. The device features a single mounting surface and must be mounted according to provided specifications.

SPECIFICATION NUMBER: DSAH3721 REVISION NUMBER: V.4 DATE: APR/14/2011 PAGE: 2 OF 5

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1202001195

Selection Guide:
θ1/2 represents the angle from the optical centerline where the luminous intensity is half of the peak value. Luminous intensity and luminous flux are within a tolerance of +/-15%.

Absolute Maximum Ratings at TA=25°C:

Electrical / Optical Characteristics at TA=25°C:
Wavelength tolerance is +/-1nm. Forward Voltage tolerance is +/-0.1V.

Note: Tested under a 1/10 duty cycle with a 0.1ms pulse width.

Part Number: AM27ZGC03 Green (InGaN)

Water Clear Lens Type:

Viewing Angle [1]:

Minimum: 1900
Typical: 2700
θ1/2: 20°
Luminous Intensity (mcd) [2] @ 20mA:

Symbol Parameter Device Typ. Max. Units Test Conditions:

λpeak (Peak Wavelength): 515 nm @ IF=20mA
λD (Dominant Wavelength): 525 nm @ IF=20mA
Δλ1/2 (Spectral Line Half-width): 30 nm @ IF=20mA
C (Capacitance): 45 pF @ VF=0V; f=1MHz
VF (Forward Voltage): 3.3 to 4.1 V @ IF=20mA
IR (Reverse Current): 50 μA @ VR=5V
Parameter Green Units:

Power dissipation: 102.5 mW
DC Forward Current: 25 mA
Peak Forward Current: 150 mA
Reverse Voltage: 5 V
Operating Temperature: -40°C To +85°C
Storage Temperature: -40°C To +85°C
SPECIFICATION NUMBER: DSAH3721 REVISION NUMBER: V.4 DATE: APR/14/2011 PAGE: 3 OF 5

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1202001195

Green AM27ZGC03

SPECIFICATION NUMBER: DSAH3721 REVISION NUMBER: V.4 DATE: APR/14/2011 PAGE: 4 OF 5

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1202001195

Reflow Soldering:
Reflow soldering is the recommended method for assembly to ensure optimal product performance and reliability. The soldering profile is detailed below. Other soldering methods are not recommended as they may cause damage to the product.

Recommended Soldering Pattern (Units: mm; Tolerance: ±0.1):
Dimensions and tolerances for the soldering pattern are specified.

Reel Dimension:
Dimensions for the reel are specified.

Tape Dimensions (Units: mm):
Dimensions for the tape are specified.

SPECIFICATION NUMBER: DSAH3721 REVISION NUMBER: V.4 DATE: APR/14/2011 PAGE: 5 OF 5

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1202001195

PACKING & LABEL SPECIFICATIONS AM27ZGC03:
Details regarding packaging and labeling specifications for the AM27ZGC03 are provided。