Kingbright ACDC02-41SEKWA-F01: Super Bright Orange Surface Mount Display

Kingbright's ACDC02-41SEKWA-F01 is a high-performance Super Bright Orange LED designed for a variety of applications requiring excellent visibility and durability. Constructed with an AlGaInP light-emitting diode chip on a GaAs substrate, this device offers superior brightness and reliability.

Features:

0.2-inch digit height for clear visibility
Low current operation for energy efficiency
Excellent character appearance and mechanically rugged construction
Gray face with white segment for high contrast
Packaged in quantities of 300 pieces per reel
Moisture sensitivity level: 2a
Compliant with RoHS standards
Applications:

Home and smart appliances for display time and digital combinations
Industrial and instrumental applications requiring numeric status indication
Handling Precautions:

Electrostatic discharge and power surges can damage the LEDs.
It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs.
All devices, equipment, and machinery must be electrically grounded.
Technical Specifications:

Emitting Color: Super Bright Orange (AlGaInP)
Wavelength at Peak Emission (IF = 10mA): 610 nm
Dominant Wavelength (IF = 10mA): 605 nm
Spectral Bandwidth at 50%: 29 nm
Capacitance: 15 pF
Forward Voltage (IF = 10mA): 2.0 - 2.35 V
Reverse Current (VR = 5V): - 10 µA
Power Dissipation: 75 mW
Reverse Voltage: 5 V
Junction Temperature: 115 °C
Operating Temperature: -40 to +85 °C
Storage Temperature: -40 to +85 °C
DC Forward Current: 30 mA
Peak Forward Current: 195 mA
Electrostatic Discharge Threshold (HBM): 3000 V
Absolute Maximum Ratings and Electrical/Optical Characteristics:

Ensure that the gap between the reflector and PCB does not exceed 0.25mm.
Luminous intensity and luminous flux are subject to a tolerance of +/-15%.
Luminous intensity value is traceable to CIE127-2007 standards.
Reflow Soldering Profile:

Recommended for lead-free SMD process.
Maximum number of reflow soldering passes is 2 times.
Avoid causing stress to the LEDs during high-temperature exposure.
Packaging & Label Specifications:

The document reflects representative usage scenarios and is for technical reference only.
Specifications are subject to change without notice. Refer to the latest datasheet for updated information.
Ensure products are operated within the specified environmental and electrical limits.
Circuit Design Notes:

Protective current-limiting resistors may be necessary.
Design the driving circuit to protect against reverse voltages and transient spikes.
Choose the safe operating current considering the maximum ambient temperature.
Avoid prolonged reverse bias to prevent metal migration and leakage current increase.
Disclaimer:

The information provided applies to typical consumer electronics applications.
For applications with special reliability requirements or life-threatening liabilities, consult with Kingbright for further assistance.
The document's contents may not be reproduced or re-transmitted without Kingbright's permission.
For Further Assistance:

Visit Kingbright's Application Notes for more design guidance.