© 2021 Kingbright. All Rights Reserved. Spec No: DSAH4379 / 1201005425 Rev No: V.11A Date: 01/04/2021

AAA3528SURKCGKC09 3.2 x 2.8 mm Surface Mount LED Lamp
Part Number: AAA3528SURKCGKC09

Emitting Color (Material): Hyper Red (AlGaInP), Green (AlGaInP)

Lens Type: Water Clear

Iv (mcd) @ 20mA: Hyper Red - 200 / 320, Green - 40 / 80

Viewing Angle: Hyper Red - *55 *100, Green - *40 *80, 120°

DESCRIPTIONS
Hyper Red and Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diodes.
Electrostatic discharge and power surge could damage the LEDs.
Use a wrist band or anti-electrostatic glove when handling the LEDs.
All devices, equipment, and machinery must be electrically grounded.
FEATURES
Suitable for all Surface Mount Device (SMD) assembly and solder processes.
Available on tape and reel.
Packaged in reels of 2000 pcs.
Moisture sensitivity level 3.
Halogen-free and RoHS compliant.
APPLICATIONS
Backlight
Status indicator
Home and smart appliances
Wearable and portable devices
Healthcare applications
ATTENTION
Observe precautions for handling electrostatic discharge sensitive devices.

PACKAGE DIMENSIONS
SELECTION GUIDE
Notes:

θ1/2 is the angle from the optical centerline where the luminous intensity is half of the peak value.
Luminous intensity/luminous flux: +/-15%.
Luminous intensity value is traceable to CIE127-2007 standards.
ABSOLUTE MAXIMUM RATINGS at TA=25°C
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Wavelength at Peak Emission (IF = 20mA): Hyper Red - 645 nm, Green - 574 nm.
Dominant Wavelength (IF = 20mA): Hyper Red - 630 nm, Green - 570 nm.
Spectral Bandwidth at 50%: Hyper Red - 28 nm, Green - 20 nm.
Capacitance: Hyper Red - 35 pF, Green - 15 pF.
Forward Voltage (IF = 20mA): Hyper Red - 1.95 - 2.5 V, Green - 2.1 - 2.5 V.
Reverse Current (VR = 5V): Hyper Red / Green - 10 µA.
TECHNICAL DATA
Forward Current vs. Forward Voltage
Luminous Intensity vs. Forward Current
Forward Current Derating Curve
Luminous Intensity vs. Ambient Temperature
REFLOW SOLDERING PROFILE
Notes:

Do not cause stress to the LEDs while exposed to high temperature.
The maximum number of reflow soldering passes is 2 times.
Reflow soldering is recommended; other methods may cause product damage.
PACKING & LABEL SPECIFICATIONS
PRECAUTIONARY NOTES
The information in this document is for technical reference and is subject to change without notice.
Refer to the latest datasheet for updated specifications before production usage.
Operate the product within the environmental and electrical limits specified in the datasheet.
For applications with special reliability requirements, consult with Kingbright for further assistance.
Do not reproduce or transmit this document without Kingbright's permission.
APPLICATION NOTES
For more information and application assistance, visit Kingbright Application Notes.