SPEC NO: DSAI0906 REV NO: V.2 DATE: MAR/31/2009 PAGE: 1 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1201100032

XPower AA1010ZG10ZC Green Preliminary Specification

Attention: Observe Precautions for Handling Electrostatic Discharge Sensitive Devices

Features:

PLCC-4 package.
Single color, Green.
High luminance.
High power, operating current at 350mA.
Suitable for all SMT assembly methods.
Packaged in reels of 500pcs.
Moisture sensitivity level: Level 4.
Patent pending.
RoHS compliant.
Package Dimensions:

All dimensions are in millimeters (inches) with a tolerance of ±0.25mm (±0.01") unless otherwise noted.
Specifications are subject to change without notice.
The device has a single mounting surface and must be mounted according to the specifications.
Description:
The LED is encapsulated with a soft silicone material.

SPEC NO: DSAI0906 REV NO: V.2 DATE: MAR/31/2009 PAGE: 2 OF 6

Applications:

Traffic signaling.
Backlighting (illuminated advertising, general lighting).
Interior and exterior automotive lighting.
Substitution of micro incandescent lamps.
Portable light source (e.g., bicycle flashlight).
Signal and symbol luminaire for orientation.
Marker lights (e.g., steps, exit ways, etc.).
Decorative and entertainment lighting.
Indoor and outdoor commercial and residential architectural lighting.
Application Notes:

Pressure or stress can damage the encapsulating material and affect the reliability of the LED. Precaution should be taken to avoid pressure on the LED encapsulating surface.
Static electricity and surges can damage LEDs. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs.
All devices, equipment, and machinery must be electrically grounded.
Handling Indications:

Use proper handling techniques to prevent damage to the LED surface. Minimize mechanical stress on the LED surface during processing and handling.
Do not touch the emitting surface with sharp objects to avoid scratching or damaging the LED.
Handle LEDs by the sides of the package. Handling instruments should not touch the emitting surface of the LED package.
For automated pick-and-place machines, the pickup nozzle should be larger than the size of the LED reflector area to avoid placing excess pressure on the LED surface.
SPEC NO: DSAI0906 REV NO: V.2 DATE: MAR/31/2009 PAGE: 3 OF 6

Absolute Maximum Ratings at TA=25°C

Electrical / Optical Characteristics at TA=25°C

Power dissipation (Pt): 1.2 W
Junction temperature (TJ): 110 °C
Operating Temperature (Top): -40 To +100 °C
Storage Temperature (Tstg): -40 To +100 °C
DC Forward Current (IF): 350 mA
Peak Forward Current (IFM): 500 mA
Thermal resistance (Rth): 9 °C/W
Optical Characteristics:

Wavelength at peak emission (λpeak): 520 nm (Typical)
Dominant Wavelength (λdom): 530 nm (Typical)
Spectral bandwidth at 50% relative intensity (Δλ): 35 nm (Typical)
Forward Voltage (VF): 2.7 V (Minimum) to 3.8 V (Maximum)
Temperature coefficient of λpeak (TCλpeak): 0.16 nm/°C
Temperature coefficient of λdom (TCλdom): 0.14 nm/°C
Temperature coefficient of VF (TCV): -2.26 mV/°C
Selection Guide:

Part No.: AA1010ZG10ZC
Dice Lens Type: WATER CLEAR
Luminous Intensity (Iv) @ 350 mA: 12 cd (Min.) to 20 cd (Typ.)
Luminous Flux (Φv) @ 350 mA: 39 lm (Min.) to 65 lm (Typ.)
Viewing Angle: 120°
Notes:

θ1/2 is the angle from the optical centerline where the luminous intensity is half the value at the optical centerline.
Luminous intensity/luminous flux: +/-15%.
Results are based on mounting on a PC board FR4 with a pad size of at least 100mm² per pad. Mounting on a metal core PCB is recommended for the lowest thermal resistance.
Tested under 1/10 duty cycle, 0.1ms pulse width.
SPEC NO: DSAI0906 REV NO: V.2 DATE: MAR/31/2009 PAGE: 4 OF 6

AA1010ZG10ZC Tape Specifications (Units: mm):

Reel Dimension: [Specify dimensions here]
Recommended Soldering Pattern: [Provide units in mm; Tolerance: ±0.1]
Reflow soldering is recommended, and the soldering profile is detailed below. Other soldering methods may damage the product.

SPEC NO: DSAI0906 REV NO: V.2 DATE: MAR/31/2009 PAGE: 6 OF 6

PACKING & LABEL SPECIFICATIONS AA1010ZG10ZC:

Packaging should be designed to protect the LED and maintain its moisture sensitivity level of 4.
Each reel should contain 500pcs as per the standard package configuration.
Labeling should include all relevant specifications, revision numbers, and handling precautions.